Two DC fast-charging networks have now said publicly that damaged CCS connectors turned up at some of their Midwest sites, and both describe the same cause. A vehicle charge port with a bent or misaligned pin can damage the charger's connector, and that damaged connector can then damage the next car that plugs in. Ionna started posting updates on Oct. 31, 2026. Mercedes-Benz High-Power Charging posted its own "CCS Pin Update" on Nov. 10.
By Ionna's count the problem is small. EVwire, citing Ionna, reports fewer than two dozen cases out of more than 1 million charging sessions. Ionna also says its NACS connectors are not affected. Both networks have taken damaged cables out of service and added on-screen reminders asking drivers to look before they plug in.
Below is what each network has said, in date order, and what it means for drivers using CCS1 plugs.
How it started
EVwire and EVChargingStations both cite Ionna's Oct. 31 update. In it, Ionna said its hardware manufacturer notified it on Oct. 30 about a handful of reports of damaged vehicle pins and charger connectors. The reports came from a select few Ionna sites in Ohio, Indiana, Illinois and Missouri. Neither network has named the manufacturer in the material reviewed here. Mercedes-Benz refers only to "the charger manufacturer."
Ionna says the damage passes from one vehicle to the next. A misaligned vehicle inlet can damage a connector, and that connector can bend a pin in the next vehicle's inlet. This is why a small number of incidents still matters. One bad cable left in service can affect every CCS car that uses it until someone finds it.
Ionna's response, day by day
Ionna's blog post, read here through a Nov. 6 Wayback Machine snapshot because ionna.com returned a Cloudflare block, has daily updates through Nov. 5:
- Oct. 30: The hardware manufacturer notifies Ionna (per EVwire and EVChargingStations).
- Oct. 31: First public update. Ionna reports the issue at a select few sites in the four states and tells drivers to check the connector and their vehicle's inlet before charging.
- Nov. 1: Ionna says it has checked 185 sites, about 85 percent by its count, and found no issues outside Ohio, Indiana, Illinois and Missouri. NACS is unaffected.
- Nov. 2: More than 1,000 CCS connectors checked over four days. Damaged cables are out of service. Ionna says connector health checks will continue through the end of November.
- Nov. 3: 50 percent of "Wave 2" checks done.
- Nov. 4: Wave 2 more than 80 percent done.
- Nov. 5: Wave 2 complete. On-screen plug-in reminders added to CCS dispensers in the affected area.
Ionna's material reviewed here does not say how many connectors were found damaged, how many were replaced as opposed to just taken out of service, or how many vehicles were affected beyond the "fewer than two dozen" reported cases EVwire cites. The checks that run through the end of November are ongoing, so any counts above are as of each update date.
For context, EVwire notes that Ionna ranked first in DC fast charging in J.D. Power's 2026 study, scoring 807 out of 1,000.
Mercedes-Benz HPC's response
Mercedes-Benz High-Power Charging's Nov. 10 update is shorter and gives no figures. The network says it found damage on "a small number" of CCS connectors, mostly in the Midwest. It describes the same mechanism: a vehicle port with a bent or misaligned pin can damage a connector, which can then affect the next vehicle.
The network lists four actions:
- Its field team is inspecting stations in the affected area.
- Damaged connectors are being removed from service and replaced.
- Charger screens across the whole network, not just the Midwest, now remind drivers to check before plugging in.
- It is working with the charger manufacturer on longer-term solutions.
Mercedes-Benz does not give a count of affected sites or connectors, does not name states, and does not set a completion date for its inspections. It lists NACS connectors as not affected.
Side by side
- Region: Ionna names Ohio, Indiana, Illinois and Missouri. Mercedes-Benz says "mostly in the Midwest."
- Scale: Ionna, via EVwire, reports fewer than two dozen cases out of more than 1 million sessions. Mercedes-Benz says "a small number" of connectors.
- Connector type: Both refer to CCS connectors. Ionna says NACS is unaffected. Mercedes-Benz also lists NACS connectors as not affected.
- Remediation: Both pulled damaged connectors and say they are replacing them. Ionna completed Wave 2 checks on Nov. 5 and plans checks through the end of November.
- Screen reminders: Ionna's cover CCS dispensers in the affected area. Mercedes-Benz's run across the whole network.
- Longer-term fix: Mercedes-Benz says it is working with the charger manufacturer. Ionna's updates reviewed here do not describe a hardware change.
Neither network says in these sources that the two incidents share a supplier or a root cause beyond the described mechanism. ChargerFeed is not drawing that connection.
What It Means for Drivers
Who is affected: Drivers using CCS1 connectors at Ionna and Mercedes-Benz HPC sites. Reported cases are concentrated in Ohio, Indiana, Illinois and Missouri for Ionna, and "mostly in the Midwest" for Mercedes-Benz. Both networks say NACS connectors are not affected.
Where you can still charge: Both networks are operating. Neither has announced closing sites. They describe taking individual damaged cables out of service. At some sites in the affected area, that may leave fewer working CCS cables until the replacements both networks describe are done.
What to do before plugging in: Both networks give the same basic advice. Look at the charger's connector and your car's charge port. Ionna tells drivers not to plug in if the pins look bent or damaged. EVChargingStations reports that Ionna's Oct. 31 update extended that advice to any charger on any network. If something looks wrong, do not plug in, use another charger, and report it to the network. Ionna says drivers with a damaged vehicle inlet should contact their local dealership, and Mercedes-Benz says to have a damaged charge port checked by the vehicle's service center.
What changes, and when:
- Ionna CCS dispensers in the affected area show plug-in reminders as of Nov. 5. Connector health checks continue through the end of November 2026.
- Mercedes-Benz HPC chargers across its network show check-before-plugging reminders as of its Nov. 10 update. Inspections in the affected area are ongoing, with no end date given.
What isn't known yet: Neither network has said in these sources who covers damage to a vehicle's charge port, how many vehicles were affected in total, or what the longer-term hardware fix will be. ChargerFeed will update this story if the networks publish those details.
Sources
- IONNA blog: An update, Oct. 31 to Nov. 5, 2026 (via Wayback Machine mirror, snapshot Nov. 6, 2026)
- Mercedes-Benz High-Power Charging: CCS Pin Update (Nov. 10, 2026)
- EVwire: IONNA pulls damaged CCS plugs in Ohio, Indiana, Illinois and Missouri
- EVChargingStations: CCS1 Connector Issues Affect A Few Ionna Sites